Home
Corporate
Services
References
Knowledgebase
Contact
© 2009 All Rights Reserved Feyza Construction
 
Knowledgebase >> Earthquake Coefficient
EARTHQUAKE COEFFICIENT

Make weight for the structure, type, depending on the type of ground seismic zone and earthquake load calculation and you have found, for example 700 tons. Taylor's system, depending on your type of the earthquake load reduction factor of 7 to be decided and 700 / 7 = 100 in your building effects of the earthquake load as 100 tons, taking into account earthquake accounts you have done. Good but why that should be 700 tons to 100 tons have accepted the burden of an earthquake?

Isostatic systems (static certain respects, only the balance equations can be solved with systems) carriers in the system to just come out with a cross-section of the power drain will force the entire system. However, we are designing structures are statically indeterminate system, and hiperstatiklik degree increases, the capacity to access the first section with the value of the load causes the system to access capacity between the value of the load causes opens.

During the earthquake effect of the earthquake in the structure evolves, the structure becomes softer and more easily damaged, the change becomes. In this case, changing the system more easily and reduces the period of the earthquake effects on the decreases.


That is due when you design your buildings need to buy 700 tons based on an earthquake there is no burden. A beam or a column of your structure can not move the load becomes almost done here is not immigration. Indeterminate as a system, migration to the load can not move enough elements to be installed until the earthquake will continue to fight. During this war, and create damage to structural elements and structures will decrease as the period will increase the structure rigidity. That is more easily able to change and easier to make a lateral displacement will become. Configure the structure of the displacement of a portion of the earthquake loads and discharge will cause the structure to cope should sönemlenmesine the earthquake loads will be reduced. Here we load the earthquake, earthquake load reduction coefficient calculated by dividing these issues to our attention we have received.

Site Map